User`s guide

278 Implementing an Open IBM SAN
4.3.1 Installing StorWatch Specialist
The Specialist software is not bundled with the SAN Data Gateway. The
Specialist software is downloaded using a Web browser by going to the IBM
Storage Area Network Data Gateway Web site:
http://www.storage.ibm.com/hardsoft/products/sangateway/support/form1.htm
This will take you to a registration window. Enter the required information and
select Submit Information. A license agreement window is shown, and once
reviewed, select I agree. The Download Main Page window will load. Then select
the specific operating system platform. Review the readme.txt file for the latest
information and instructions, before installing.
This Web site also contains all the latest firmware for the SAN Data Gateway and
supported host bus adapters.
The StorWatch SAN Data Gateway Specialist software file is a self-extracting file.
Once it has been downloaded, execute or run the file and it will automatically
load onto your computer.
Starting the Specialist
To start the Specialist, the server must be started first, and then the client can be
launched. Figure 4-4 provides an example of the StorWatch SAN Data Gateway
Specialist with server and client loaded onto the same Windows NT computer.
Figure 4-4 StorWatch SAN Data Gateway Specialist startup
Once the server has been launched, you should see a window similar to
Figure 4-5.