User`s guide

14 Implementing an Open IBM SAN
After you install the ibm2105.rte file and all of the 2105 devices are reconfigured,
vary on the volume groups and remount the file systems. The data on the file
systems should be available again.
1.4.4 Installing the 2105 host attachment package
Perform the following steps by using SMIT to install the IBM 2105 host
attachment on your system. Install the host attachment package from a compact
disc or a diskette. You must have superuser authority to complete the
instructions.
1. From your desktop window, type smit install_update to go directly to the
installation panel.
2. Click Install and Update from the Latest Available Software and press Enter.
3. Press F4 to open the Input Device/Directory for Software window.
4. Select the CD-ROM drive that you are using for the installation, for example,
/dev/cd0.
5. Press Enter.
The Install and Update from the Latest Available Software window opens.
6. Click Software to Install and press F4.
7. Select Software Packages and press F7.
The Install and Update from the Latest Available Software panel is displayed with
the name of the software you selected to install.
8. Check the default option settings to ensure that they are what you need.
9. Press Enter to install the software.
SMIT responds with the following question: Are you sure?
10.Press Enter to continue.
The installation process may take several minutes. A message is displayed when
the installation process is complete.
11.Press Enter to continue. The installation process may take several minutes.
A message is displayed when the installation process is complete.
12.Press F10 when the installation process is complete.
13.Exit from SMIT.
Note: The following procedure is an example. The example uses /dev/cd0 for
the address of the CD-ROM drive. Your address might be different.