User`s guide

Chapter 3. Implementing the INRANGE FC/9000 Fibre Channel Director 253
All primary FC ports of these servers will be zoned to ESS Bay 1, Port 4,
and all secondary FC ports of these servers will be zoned to ESS Bay 4, Port 4.
We use pvlinks as multipathing software. Another possibility is to use the IBM
Subsystem Device Driver (SDD).
In Figure 3-66 we show an overview of what we will achieve.
Figure 3-66 Server setup for soft zoning
Be aware that such a zone-configuration is only advisable in specific
environments.
Be sure to have only host adapters of the same type in a zone. This is true in our
case. Therefore, we just implement two zones instead of dedicated zones for
each server.
ESS 2105 - F20
64
Hewlett Packard servers running HP-UX 11.0
HP L Class 2000 HP K Class 360HP D Class 280HP L Class 2000
ShortWave fibre optics (50micron)
Inrange FC/9000