User`s guide

Chapter 3. Implementing the INRANGE FC/9000 Fibre Channel Director 235
Each TL_Port has its own translation entries list, as shown in Figure 3-53.
Figure 3-53 Translation Entries List with zoning
Only TL_Ports have translation entries lists, in our case port1 and port5.
The list of port5 (initiator) was manually created by adding the WWN of portA and
portB. It means that port5 with its attached portE could have access to the ports
A and B. Since TL-Cfg settings overrule name server zone settings, we do not
need to zone these ports.
Furthermore, portD has access to portB. This is not implemented through a
translation entries list, but by using zoning. Since portD is not a private loop port,
there is no list for this port anyway.
The list for portA is automatically created using the auto learning feature. Once
the initiator portE has actually logged in to portA, then portE will be added to the
list.
TL-Port1
Privat target: port A
Translation entries list:
(specified)
-portA
-portB
FL-Port2
TL-Port5
FL-Port4
F-Port3
Public inititiator: port D
Public target: port B
Privat inititiator: port E
Node inititiator: port C
Translation entries list:
(Auto Learning)
-portE
Zoning in fabric:
(C,B) = zone_1
(D,B) = zone_2