User`s guide

Chapter 3. Implementing the INRANGE FC/9000 Fibre Channel Director 233
The translation entries list for private target TL_Ports contains all initiators that try
to get access to these targets. An Auto Learning feature enables this translation
entries list to be updated automatically. That is why, for private targets, you
cannot specify any WWNs in the TL-CFG window. However, you should limit the
actual number of initiators trying to communicate with this TL_Port to a maximum
of 31.
An Auto Learning feature for TL_Ports attached to private initiators is not
available. All devices that this private initiator has to communicate with must be
added to the list manually. Once you have selected Private Initiator in the
TL-CFG window, some additional buttons become active. Click Add from List to
add devices that are currently known to the fabric, as illustrated in Figure 3-51.
Note: The selection of Private Target or Private Initiator for a TL_Port does not
necessarily mean that you have such types attached to it.
The private target option is only useful if a private initiator should access this
particular target port.
If a public initiator should get access to this private target you should actually
set this private target to Private Initiator. Then you should proceed to specify
the WWN of the Public initiator that should have explicit access to this private
target.
In such a scenario, the Private Initiator label for the radio button may be
misleading.