User`s guide

232 Implementing an Open IBM SAN
The creation and maintenance of this list is different between private targets and
private initiators. Therefore, you have to specify whether a particular TL_Port has
private targets or a private initiator attached to it. Click the TL-CFG button to
open the TL Config window as shown in Figure 3-50.
Figure 3-50 IN-VSN: Selecting target or initiator mode for TL ports
Select Private Target if you have targets attached to this TL_Port which should
be accessed by other private initiators — for instance, private loop JBODs
accessed by another private initiator.
Select Private Initiator if you have private loop initiators attached, such as
elderly FC host adapters. Also, select this option if you want a private target
device on this TL_Port to get accessed by a public initiator.