User`s guide

214 Implementing an Open IBM SAN
To simplify further usage of this environment, we decided to use the names as
shown in Table 3-2.
Table 3-2 Director and port names
These names belong to the physical ports of the director and not to the ports of
attached devices.
Consequently, when changing the cabling of the director, you should also ensure
that any change to the cable layout reflects the changes, and therefore the
current environment.
Director component Name to assign Physical port of director
FC/9000 director osvl_fc64 N/A
first port for D class server osplsun2_td0 54
second port for D class
server
osplsun2_td1 55
first port for L class server
(HP1)
osplhp1_a 57
second port for L class
server (HP1)
osplhp1_b 58
first port for L class server
(GEODE)
geode_td0 60
first port for K class server hewlett_td0 63
second port for K class
server
hewlett_td1 62
ESS Bay1 Port4 ospl5b1p4 40
ESS Bay4 Port4 ospl5b4p4 48