User`s guide

204 Implementing an Open IBM SAN
To change a user, first select it in the Users list. Once you have selected a user,
you are automatically in change mode. Change the desired settings and click
Accept as shown in Figure 3-22.
Figure 3-22 Change attributes of an existing IN-VSN user
We have changed the rights of user itso_2 from admin to operator.
After accepting the changes, this modified user will appear with updated status.
You can modify multiple users before actually making these changes effective by
clicking Save.
To be able to change all users, you must be logged in with admin rights. If you
are logged in with only operator rights, then only your own user’s password and
description can be modified. An operator is not allowed to change its own rights
(operator to admin, for example).