User`s guide

Chapter 3. Implementing the INRANGE FC/9000 Fibre Channel Director 187
3.2.5 Installing the IN-VSN Enterprise Manager software
There are a number of different ways in which the IN-VSN software can be
delivered.
If software feature code 7600 is configured, the workstation pack will include a
PC, monitor, Ethernet Hub, and Modems. The management software comes
pre-installed on the PC.
If you require more than one version of the IN-VSN client code, this is achieved
by using feature code 7201.
If no additional software feature codes are configured when ordering the
INRANGE Director, you will receive a CD that contains the IN-VSN server and
client code. This CD is only licensed for one copy of the server and one copy of
the client.
PC hardware for IN-VSN server
The server and client can be installed on a customer owned and designated PC,
as long as it meets with the following minimum recommended specifications:
IBM Pentium III PC or an IBM-Compatible Pentium III PC
򐂰 500 MHz processor
򐂰 128 MB SDRAM
򐂰 4 MB Video RAM
򐂰 13 GB hard drive
򐂰 1.44 MB diskette drive
򐂰 CD-ROM
򐂰 1 parallel port
򐂰 1 Ethernet 10Base-T/100 Base-TX
򐂰 IBM or equivalent mouse
򐂰 2 external serial com ports (debug serial cable, external modem)
򐂰 1 internal com port (internal modem)
򐂰 17-inch 1280 x 1024 x 256 SVGA monitor
򐂰 Windows NT 4.0 with Service Pack 6a and higher
򐂰 Windows 2000 Professional
򐂰 Internal and External modem compatibility
򐂰 Analog protocol support: V.90 5 6kb/s ITU Standard, 3Com/US
Robotic/Multi-Tech (international) hardware compatible modems
recommended (do not use Win modem software controlled modems)
Be aware that only Windows operating systems are supported as software
platforms for IN-VSN tools.