User`s guide

142 Implementing an Open IBM SAN
Figure 2-87 Displays of all four volume assignments
We see all the information about the location and the current assignments here,
as well as the ESS logical volume ID. This is the ID that will help us later to
identify the ESS logical volumes on our host system. Right now, there are not too
many entries in the table.
Later on, as we define more volumes, the table will become large. To make it
easier to view the table, we can also perform a sort on the table. The sort can be
performed using three choices of levels using the drop down list boxes on the top
of each column. To perform the sort, we press the Perform Sort button.
Now, we will modify ESS logical volume assignments.
2.6 Modifying ESS logical volume assignments
At this time we would only have to configure all the ESS FC ports to enable the
ESS to present volumes to a Fibre Channel host. There are further changes of
the assignment of volumes to ports that might have to be performed. For this, we
use the Modify Volume Assignments panel.