User`s guide

Chapter 2. IBM TotalStorage Enterprise Storage Server configuration 135
Viewing changes on the Graphical View panel
To see the updates we have made, we press the Storage Allocation button.
This takes us back to the Storage Allocation — Graphical View panel. There, we
select the host FC port that we configured. This is shown in Figure 2-79.
Figure 2-79 Host FC port selected
This shows the volumes defined for our host FC port. The small purple parts of
both disk arrays represent the space that is filled with volumes that are assigned
to the selected host FC port. The green part indicates space that is not yet
allocated.
Clicking on an ESS Fibre Channel port will draw lines to the volumes configured
for the selected host Fibre Channel port. This is shown in Figure 2-80.