User`s guide

Chapter 2. IBM TotalStorage Enterprise Storage Server configuration 117
2.4.1 Creating host FC port definitions
From the Open System Storage panel, we press the Modify Host Systems
button, as shown in Figure 2-49.
Figure 2-49 Entry to the Modify Hosts Systems panel
Viewing the Modify Host Systems panel
We are now taken to the Modify Host Systems panel, as shown in Figure 2-50.
This panel consists of the Host Attributes entry fields and The Host Systems List
table. The Host Systems List represents each defined host FC port. If a host has
two Fibre Channel ports, this appears as two entries in the Host Systems List.
As we can see, there are no host FC ports defined at this time.
Figure 2-50 Modify Host Systems panel, no host FC ports defined