User`s guide

100 Implementing an Open IBM SAN
Figure 2-28 FC host port selected
In contrast to this, the host SCSI ports have an affinity to the ESS SCSI ports,
which is visible by selecting a host SCSI port, as shown in Figure 2-29.
Figure 2-29 SCSI host port selected
Using the disk group section
The two ESS clusters with the SSA device adapters and the SSA loops with the
disk groups are shown below the ESS Fibre Channel ports.
This is shown in Figure 2-30 and is how it looks if there is no disk group
configured.