Specifications

Message:
wwidmgr available only prior to booting. Reinit system and try again.
Explanation:
Type P00>>>init wwidmgr again.
Message:
wwidmgr: No such command
Explanation:
Type P00>>set mode diag wwidmgr
If the system is already running, you can find the WWPN in the log file
/var/adm/messages.
2. Type: #fgrep wwn /var/adm/messages
Figure 63 shows an example of the output when you type #fgrep wwn /
var/adm/messages. You can find the WWPN in the last column.
Locating the WWPN for a Hewlett-Packard host
To locate the WWPN for a Hewlett-Packard host system, perform the following
steps:
1. Go to the root directory.
2. Type: ioscan -fn | more
3. Look under the description for the Fibre Channel Mass Storage adapter.
For example, look for the device path name /dev/td1.
4. Type: fcmsutil /dev/td1 where /dev/td1 is the path.
Locating the WWPN for an iSeries host
To locate the WWPN for an iSeries host system, perform the following steps:
1. On the iSeries Main Menu panel, type strsst.
2. On the Start Service Tools (STRSST) Sign On panel, type your service tools
user ID and password.
3. On the System Service Tools (SST) panel, type 1 to select Start a service tool.
4. On the Start a Service Tool panel, type 7 to select Hardware service manager.
...
Nov 9 09:01:16 osplcpq-ds20 vmunix: KGPSA-BC : Driver Rev 1.21 : F/W Rev 2.22X1(1.13) : wwn 1000-0000-c922-d469
Nov 10 10:07:12 osplcpq-ds20 vmunix: KGPSA-BC : Driver Rev 1.21 : F/W Rev 2.22X1(1.13) : wwn 1000-0000-c922-d469
Nov 13 17:25:28 osplcpq-ds20 vmunix: KGPSA-BC : Driver Rev 1.21 : F/W Rev 2.22X1(1.13) : wwn 1000-0000-c922-d469
Nov 14 11:08:16 osplcpq-ds20 vmunix: KGPSA-BC : Driver Rev 1.21 : F/W Rev 2.22X1(1.13) : wwn 1000-0000-c922-d469
Nov 15 10:49:31 osplcpq-ds20 vmunix: KGPSA-BC : Driver Rev 1.21 : F/W Rev 2.22X1(1.13) : wwn 1000-0000-c922-d469
...
Figure 63. Example of the output from the Compaq #fgrep wwn /var/adm/messages command
154 ESS Host Systems Attachment Guide