Specifications
v Oemsetup
v Readme
v Txtsetup.oem
15. Double click Readme to get the instructions to install the fibre-channel adapter
driver. Print the Readme file.
16. In the WinZip Wizard - Unzip Complete window, click Close.
17. Ensure that the name of the file you want to download is displayed in the
window.
If the name of the file you want to download is not displayed in the window, go
to step 2 on page 147 in “Downloading the Emulex adapter driver” on
page 131.
18. Click Save to download and unzip the file to your hard drive.
A window opens that indicates the progress of the download operation. When
the progress indicator window closes, the download is complete.
Installing the Emulex adapter drivers
Perform the following steps to install the fibre-channel adapter drivers.
Note: If you are installing the fibre-channel adapter for the first time, you must
specify the correct topology. You must also select the appropriate device
mapping driver.
1. From your desktop, click Start → Settings.
2. Double click Control Panel.
3. Double click SCSI Adapters.
4. Click the Drivers tab.
5. Click Add to create a list of drivers.
A window opens that indicates the progress of the operation. When the
operation completes, the window closes and displays another window called
Install Driver.
6. From the Install Driver window, click Have Disk.
7. Enter the path to the driver file that you downloaded and click OK.
For example, if you downloaded the adapter driver file to a folder called
Emulex, type c:\emulex\emulex.zip.
8. To install the driver, highlight the line that lists the driver you want and click
OK.
Note: The driver affects every adapter in the system. If you have more than
one adapter that requires different parameter settings, you must change
the parameter settings with the port utility and restart your host system.
9. Click Yes to restart the host system.
10. After you restart your host system, click Start → Settings.
11. Double click Control Panel.
12. Double click SCSI Adapters.
13. Click the Drivers tab.
Verify that the Emulex SCSI driver is present and started.
14. Click the Devices tab.
Verify that the host adapter is on the list.
148 ESS Host Systems Attachment Guide