Specifications
v Target and public initiator
v Target and private initiator
Note: If you use the Emulex LP8000 adapter card with the McData ED-5000
switch, non-switched configurations are not supported. For fibre-channel
connection through the SAN Data Gateway, the ED-5000 is only supported
on the Emulex adapter.
Perform the following steps to install the Emulex LP8000 adapter card:
1. Turn off and unplug the computer.
2. Remove the computer case.
3. Remove the blank panel from an empty PCI bus slot.
4. Insert host adapter board into the empty PCI bus slot. Press firmly until seated.
5. Secure the mounting bracket for the adapter to the case with the panel screw.
6. Replace the computer case by tightening the screws on the case or use the
clamp to secure the cover.
Downloading the Emulex adapter driver
Perform the following steps to install the adapter driver.
1. Plug in and restart your host system.
2. Go to the following Web site:
www.emulex.com
3. From the Quick Links menu, click Documentation, Drivers and Software.
4. Click the host adapter type from the host adapter menu.
For example, click Emulex LP8000.
5. Click Drivers for Windows 2000.
6. Click Specialized Drivers.
7. Click SCSI/ID multi-port xxxxx or SCSI port xxxxx where xxxxx is the name
of the adapter driver.
8. Click Download Now.
9. From the File Download window, click the appropriate button and proceed as
indicated:
v Open this file from its current location
Go to step 10.
v Save this file to disk
Go to step 17 on page 148.
10. In the Winzip window, click I agree.
11. In the WinZip Wizard - Welcome window, click Next.
12. In the WinZip Wizard - Select Zip File xxxxxxxx.zip window, where
xxxxxxxx is the name of the file, highlight the file that you want to unzip.
13. Click Next.
14. In the WinZip Wizard - Unzip window, click Unzip now.
A window opens that indicates the progress of the download operation. When
progress indicator window closes, the download is complete. When the
operation to unzip the file completes, a window opens to display the following
file names:
v Lpscsi
v Lputilnt
Chapter 12. Attaching to a Windows 2000 host 147
|
|