Specifications

3. From the Disk Administrator window, select the disk drive letter that is your
target.
4. From the menu bar, click Tools → Assign Drive letter.
5. From the Assign Driver letter window, click Do Not Assign a Drive Letter.
6. Click OK.
7. Perform the FlashCopy operation.
Note: If the ESS uses the volume serial numbers to do a FlashCopy on a
Windows NT host system, use the IBM Subsystem Device Driver to
obtain the volume serial numbers.
8. Go back to the Disk Administrator Window. From the task bar, click Start →
Programs → Administrative Tools → Disk Administrator and select the
FlashCopy target.
9. From the menu bar, click Tools Assign → Drive letter.
10. From the Assign Driver letter window, click Select the Assigned Drive letter.
11. Click OK.
For more information about performing a FlashCopy, see Implementing ESS Copy
Services on UNIX and Windows NT/2000.
Chapter 11. Attaching to a Windows NT 4.0 host 135
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|