Specifications

Figure 57 shows the start lpfc auto-generated configuration.
Note: Anything you put within this auto-generated section will be deleted if you
execute pkgrm to remove the lpfc driver package. You might need to add
additional lines to probe for additional LUNs or targets. You should delete
any lines that represent lpfc targets or LUNs that are not used.
name="sd" class="scsi"
target=0 lun=0;
name="sd" class="scsi"
target=0 lun=1;
name="sd" class="scsi"
target=0 lun=2;
name="sd" class="scsi"
target=0 lun=3;
name="sd" class="scsi"
target=0 lun=4;
name="sd" class="scsi"
target=0 lun=5;
name="sd" class="scsi"
target=0 lun=6;
name="sd" class="scsi"
target=0 lun=7;
name="sd" class="scsi"
target=0 lun=8;
name="sd" class="scsi"
target=0 lun=9;
name="sd" class="scsi"
target=0 lun=10;
.
.
.
name="sd" class="scsi"
target=0 lun=48;
name="sd" class="scsi"
target=0 lun=49;
Figure 56. Example of sd.conf file entries for fibre-channel
name="sd" parent="lpfc" target=0 lun=0;
name="sd" parent="lpfc" target=1 lun=0;
name="sd" parent="lpfc" target=2 lun=0;
name="sd" parent="lpfc" target=3 lun=0;
name="sd" parent="lpfc" target=4 lun=0;
name="sd" parent="lpfc" target=5 lun=0;
name="sd" parent="lpfc" target=6 lun=0;
name="sd" parent="lpfc" target=7 lun=0;
name="sd" parent="lpfc" target=8 lun=0;
name="sd" parent="lpfc" target=9 lun=0;
name="sd" parent="lpfc" target=10 lun=0;
name="sd" parent="lpfc" target=11 lun=0;
name="sd" parent="lpfc" target=12 lun=0;
name="sd" parent="lpfc" target=13 lun=0;
name="sd" parent="lpfc" target=14 lun=0;
name="sd" parent="lpfc" target=15 lun=0;
name="sd" parent="lpfc" target=16 lun=0;
name="sd" parent="lpfc" target=17 lun=0;
name="sd" parent="lpfc" target=17 lun=1;
name="sd" parent="lpfc" target=17 lun=2;
name="sd" parent="lpfc" target=17 lun=3;
Figure 57. Example of start lpfc auto-generated configuration
114 ESS Host Systems Attachment Guide
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|