Specifications

Installing the JNI SBUS adapter card
This section tells you how to attach an ESS to a Sun host system with the JNI
SBUS adapter card.
Perform the following steps to install the JNI SBUS adapter card:
1. Turn off and unplug the computer.
2. Remove the computer case.
3. Remove the blank panel from an empty SBUS slot.
4. Insert the host adapter board into the empty SBUS slot. Press firmly until
seated.
5. Secure the mounting bracket for the adapter to the case with the panel screw.
6. Replace the computer case by tightening the screws on the case or use the
clamp to secure the cover.
Downloading the current JNI SBUS adapter driver
Perform the following steps to download the JNI SBUS adapter driver:
1. Plug in and restart your host system.
2. Go to the following Web site:
www.jni.com
3. From the navigation menu at the top of the page, click Drivers.
4. From the Locate Driver by Product menu, click FC64-1063.
5. From the FCI-1063 menu, find the section for Solaris - JNI. Click fcw.pkg.
6. In the dialog box for File Download, click Save this file to disk. Click OK.
7. In the Save As dialog box, create a temporary folder. For example, create a
folder called Temp.
Note: If you already have a folder called Temp, change to the Temp directory.
8. Click Save.
A window opens that shows the progress of the download.
9. When the download completes, click Close.
10. If you downloaded the driver file from a Sun host system, go to “Installing the
JNI SBUS adapter driver”. If you downloaded the driver file from a non-Sun
host system, transfer the driver file to a Sun host system, and then go to
“Installing the JNI SBUS adapter driver”.
Installing the JNI SBUS adapter driver
Perform the following steps to install the JNI SBUS adapter driver:
1. Go to the following Web site:
www.jni.com
2. From the navigation menu at the top of the page, click Drivers.
3. From the Locate Driver by Product menu, click FC64-1063.
4. From the FC64-1063 menu, find the section for Solaris - JNI. Click readme.txt.
5. Print the readme.txt file.
6. Follow the instructions in the readme.txt file to install the JNI SBUS adapter
card.
7. Update the parameter list and restart the host system. See Table 22 on
page 115. for the parameters and recommended settings.
Chapter 10. Attaching to a Sun host 109