Specifications
Installing the JNI PCI adapter card
This section tells you how to attach an ESS to a Sun host system with the JNI PCI
adapter card.
Perform the following steps to install the JNI PCI adapter card:
1. Turn off and unplug the computer.
2. Remove the computer case.
3. Remove the blank panel from an empty PCI bus slot.
4. Insert the host adapter board into the empty PCI bus slot. Press firmly until
seated.
5. Secure the mounting bracket for the adapter to the case with the panel screw.
6. Replace the computer case by tightening the screws on the case or use the
clamp to secure the cover.
Downloading the current JNI PCI adapter driver
This section tells you how to download the JNI PCI fibre-channel adapter driver.
1. Plug in and restart your host system.
2. Go to the following Web site:
www.jni.com
3. From the navigation menu at the top of the page, click Drivers.
4. From the Locate Driver by Product menu, click FCI-1063.
5. From the FCI-1063 menu, find the section for Solaris - JNI. Click fca-pci.pkg.
6. In the dialog box for File Download, click Save this file to disk. Click OK.
7. In the Save As dialog box, create a temporary folder. For example, create a
folder called Temp.
Note: If you already have a folder called Temp, change to the Temp directory.
8. Click Save.
A window opens that shows the progress of the download.
9. When the download completes, click Close.
10. If you downloaded the driver file from a Sun host system, go to “Installing the
JNI PCI adapter driver”. If you downloaded the driver file from a non-Sun host
system, transfer the drive file to a Sun host system, and then go to “Installing
the JNI PCI adapter driver”.
Installing the JNI PCI adapter driver
Perform the following steps to install the JNI PCI adapter drivers:
1. Go to the following Web site:
www.jni.com
2. From the navigation menu at the top of the page, click Drivers.
3. From the Locate Driver by Product menu, click FCI-1063.
4. From the FCI-1063 menu, find the section for Solaris - JNI. Click readme.txt.
5. Print the readme.txt file.
6. Follow the instructions in the readme.txt file to install the JNI PCI adapter card.
7. Update the parameter list and restart the host system. See Table 22 on
page 115 for the parameters and recommended settings.
108 ESS Host Systems Attachment Guide