Product guide

Identifying and diagnosing loss of signal for a switch port 83
Monitoring Your Datacenter
Figure 57 Opening a Path Details view
The empty view above Topology changes to Path Details.
3. Drags the array’s front-end director from the Topology view to the Path Details
view.
4. Under Select Object, selects the front-end director and clicks Show Devices.
The Path Details view now shows which host devices the affected director is
mapped to. By highlighting the affected connection in the table in the top part of
the view, the administrator sees more details about this I/O path in the lower part
of the view (Figure 58).