Product guide

Allocating CLARiiON devices (LUNs) to a host 157
Configuring and Controlling Your Datacenter
1. On the Console toolbar, clicks the pull-down menu of the blue Storage Allocation
button and selects Path Details.
2. In the Console tree, expands the folder Hosts, and then drags host l82ar136 into
the target panel.
3. Selects the host to show devices. A table showing the path details by HBA for this
host appears.
4. Clicks any HBA in the table.
The Path details for the host appear as shown in Figure 138.
Figure 138 Path Details for host l82ar136
Figure 138 shows that there is connectivity between the host and the CLARiiON array
(WRE00022201023).
Because the path already exists, the administrator does not need to determine if
ports are available, and can skip that portion of the workflow.
Determining if configured storage is available
The administrator determines if there is available configured storage on the CLARiiON
array through the StorageScope Array Configuration report generated in “Determining
if storage is available on the CLARiiON array” on page 155. The StorageScope Array
Summary report is shown in Figure 139 on page 158.