Product guide

Allocating storage to a host from a Symmetrix array 143
Configuring and Controlling Your Datacenter
Note: New zone Zone_l82ar156 is now created with host l82ar156 and Symmetric
port FA-3D, Port 0 as members. The new zone appears in the Console tree under
Connectivity, Fabrics, Mainstreet_3800 [Fabric], Planned VSANs, VSAN0006,
Planned Zones.
Adding a zone to a zone set and activating the zone set
Host l82ar156 and storage port FA-3D, Port 0 now exist in zone Zone_l82ar156. The
administrator now adds the zone to a zone set and activates the zone set on virtual
SAN VSAN0006. The administrator can add the zone to an existing zone set or create a
new zone set.
In this example the administrator creates and activates new zone set Zone_Set_156.
To complete this task, the administrator:
1. In the Console tree, expands the folders Connectivity, Fabrics, Mainstreet_3800
[Fabric], Planned VSANs, VSAN0006, Planned Zones.
2. In the Planned Zones folder, right-clicks Zone_l82ar156 and selects Zoning, Add
Zone to Zone Set (Figure 125).
Figure 125 Adding a zone to a zone set