Product guide

142 EMC Ionix ControlCenter 6.1: Taking Control of Your Datacenter
Configuring and Controlling Your Datacenter
Figure 124 New Zone dialog box
Note: Zoning policies specify certain characteristics of new zones, and help to
ensure that these characteristics are the same across all zones created in a fabric
or a work group. Once a zone is created, however, the policy that was applied
during zone creation or editing no longer has any effect on the zone.
4. For Zone, enters Zone_l82ar156 for the name of the new zone.
5. In the Available Ports table, selects host l82ar156 and storage port FA-3D, Port 0,
(Member 5006048acadfe2d2).
6. Clicks Add to move the host and storage port to the Ports in Zone table. Ports
moved from one table to the other in the current session are displayed in blue
italics.
Note: The administrator can use the two drop-down filter lists to manage the
display of ports/aliases that appear in the Available Ports table. The first list
filters by fabric; the second filters by port type or zoning type.
7. Clicks OK to save changes and closes the dialog box.