Product guide

Allocating storage to a host from a Symmetrix array 137
Configuring and Controlling Your Datacenter
Figure 118 Step 1 of the VSAN wizard
3. In step 1 of the VSAN wizard, performs the following actions:
a. Enters the VSAN ID and VSAN name.
b. Selects the load balancing method, and switch membership.
c. For Interop Value, selects Interop-1 to allow for the addition of interop-enabled
Brocade or McDATA switch ports via the switch's management software at a
later time.
d. Checks switches Cisco9216i and Cisco9216A in the table.
e. Clicks Next.
Step 2 of the VSAN wizard appears (Figure 119 on page 138).