Product guide

Allocating storage to a host from a Symmetrix array 135
Configuring and Controlling Your Datacenter
Gatekeeper devices may also need to be added to the host depending on what kind of
information needs to be collected from the Symmetrix array.
To do this, the administrator:
1. In the Console tree, right-clicks the Symmetrix array (000187400075) and selects
Device Mapping > SDR Device Mapping.
Ionix ControlCenter acquires a lock on the Symmetrix array and the SDR Device
Mapping dialog box appears (Figure 117).
Figure 117 SDR Device Mapping dialog box
2. Under Select Devices, expands Unmapped Devices, and selects the standard
devices (created in the previous sections) and gatekeeper devices (if required) to
map to the FA port.
3. Under Select a Port, expands Host Directors and selects the director and port:
FA-3D Port 0.
4. Selects Port 0, to highlight it, and clicks Copy.
The devices move from the left panel to the right panel under the selected port.
5. Repeats this procedure to add the new BCVs. The administrator selects FA-3C Port
0.
6. Clicks Continue to commit the changes.
The dialog box displays the proposed changes.
7. Clicks Execute to perform the changes.
The screen is updated as the changes are made.