Product guide

Validating and optimizing a SAN configuration 107
Configuring and Controlling Your Datacenter
Clicks the snapshot name, and then clicks View Report to view the Overview
report.
8. Edits the snapshot to model changes or resolve problems, if necessary.
9. Clicks the snapshot name, and then clicks Make Copy and Edit. The snapshot is
copied to the My Designs section so that it can be edited. The snapshot is now a
design.
Modeling proposed SAN changes
The SAN design created in “Validating an existing SAN environment” on page 102
provides a baseline against which SAN changes can be modeled.
Resolving the availability problem
The Overview report displays a warning message which shows an availability problem
on host losbd205. Two connections to the same switch in the fabric are discovered, as
shown in Figure 81.
Figure 81 Overview Report: availability problem
Note: To run an Overview report, set this option from the snapshot setup page as
show in Figure 82.