Installation guide

A – Fast!UTIL Scan Fibre Channel Devices
FC0151102-00 D A-5
A.3
Scan Fibre Channel Devices
This option scans the FC loop and lists all the connected devices by loop ID.
Information about each device is listed, for example, vendor name, product name,
and revision. This information is useful when configuring your QLA2xxx board
and attached devices.
A.4
Fibre Disk Utility
This option scans the FC loop bus and lists all the connected devices by loop ID.
You can select a disk device and perform a low-level format or verify the disk media.
CAUTION! Performing a low-level format destroys all data on the disk.
A.5
Select Host Adapter
Use this setting to select a specific QLA2xxx board if you have multiple QLA2xxx
boards in your system.