Installation guide

7 – Solaris SPARC Driver Installation Installing the Solaris SPARC Driver
FC0153301-00 D 7-3
12. Type y and press <ENTER> to continue the driver installation. The pkgadd
program notifies you when the driver installation is complete. For example:
Installing QLogic QLA2100 driver as <QLA2100>
## Installing part 1 of 1.
/kernel/drv/qla2100
/kernel/drv/qla2100.conf
[ verifying class <none> ]
## Executing postinstall script
Installation of <QLA2100> was successful.
13. You are prompted for an action. For example:
Type [go] when ready,
or [e] to eject the diskette,
or [q] to quit:
14. Type q and press <ENTER> to quit the installation process.
15. Remove the diskette that contains the QLogic driver.
16. Enter the following text to reboot and reconfigure the system:
reboot -- -r