Installation guide
FC0153301-00 D 5-1
Section 5
NetWare Driver Installation
(QL2100.HAM)
5.1
Introduction
This section provides instructions for installing the NetWare driver in an already
installed Novell NetWare 4.11, 4.2, or 5.X system.
5.2
NetWare Driver Files and Switch Options
The latest version of the software drivers and documentation for NetWare 4.11,
4.2, and 5.X are available on the QLogic web site. Be sure to review the
README.TXT file for both new and changed information.
You can load the QL2100.HAM driver with optional switches to customize the
interface between the driver and Novell NetWare. The switches are described in
table 5-1.
Table 5-1. QL2100.HAM Switch Options
Parameter Description
SLOT Provides support for multiple QLA2xxx boards and loads the
driver for each board individually. This switch is mandatory if you
have more than one board.
/LUN Enables support for multiple LUN (logical unit number) devices.
This switch is optional.