Specifications

Sun StorageTek 6140 Array Release Notes, Release 6.2 31
FF – IOM Boot Diagnostic executing
88 – This IOM is being held in Reset by the other IOM
AA – IOM-A application is booting up
bb – IOM-B application is booting up
L0 – Mismatched IOM types
L2 – Persistent memory errors
L3 – Persistent hardware errors
L9 – Over Temperature
H1 – SFP Speed Mismatch (2 Gb/s SFP installed when operating at 4 Gb/s)
H2 – Invalid/Incomplete Configuration
H3 – Maximum Reboot Attempts Exceeded
H4 – Cannot Communicate with Other IOM
H5 – Midplane Harness Failure
H6 – Firmware Failure
H7 – Current Enclosure Fibre Channel Rate Different than Rate Switch
H8 – SFP(s) Present in Currently Unsupported Slot (2A or 2B)
Release Documentation
Following is a list of documents related to the Sun StorageTek 6140 Array. For any
document number with nn as a version suffix, use the most current version
available.