Specifications

Sun StorageTek 6140 Array Release Notes, Release 6.2 27
With Release 5.0, the Sun StorageTek 6140 Array Getting Started Guide (Release 2.0) has
been replaced by the Sun StorageTek Common Array Manager Software Installation
Guide and the Sun StorageTek 6140 Array Hardware Installation Guide. Refer to the Sun
StorageTek Common Array Manager Software Installation Guide for information about
Sun StorageTek Common Array Manager software installation, firmware files, and
logging into the browser interface and sscs CLI man pages.
Cable Changes in Installation Guide
The Sun StorageTek 6140 Array Hardware Installation Guide has not yet been
updated for:
■ The addition of one RJ45-DB9 adapter with null modem to the contents of the
controller tray box.
■ A change from copper cables to 2-meter optical FC cables and SFPs in the
expansion module box.
The outdated copper cables are referenced in each configuration cabling section.Use
the optical FC cables instead.
Revised Specifications
The following are revised specifications for the array and its documentation.
Controller Module (fully populated)
■ Acoustics: 6.8 bels
■ Heat Output:
380 Watts (1297 BTU/Hr) using AC Power Source
445 Watts (1519 BTU/Hr) using DC Power Source (NEBS)
■ Altitude (storage) 100 ft (30.5 M) below sea level to 9,840 feet (3,000 meters)
■ AC Power
3.73 A Max Operating @ 115 VAC (90 to136 VAC Range), 50/60 Hz
1.96 A Max Operating @ 230 VAC (180 to 264 VAC Range), 50/60 Hz
■ DC Power
15.8 A Max Operating @ 36 VDC (-36 to -72 VDC Range)
■ Safety and Emissions
EN 300 386 (NEBS)
CSM200 Expansion Module (fully populated)
■ Acoustics: 6.8 bels