Specifications

Sun StorageTek 6140 Array Release Notes, Release 6.2 7
Multipathing Software
You must install multipathing software on each data host that communicates with
the Sun Storage 6140 Array.
For Solaris OS 8 and 9 data hosts, the multipathing software is part of the Sun
StorageTek SAN Foundation Kit (SFK) software. Solaris OS 10 includes the
multipathing software. For data hosts running the Solaris OS, follow the instructions
in the Sun StorageTek 6140 Array Hardware Installation Guide to download and install
the software from the Sun Download Center.
TABLE 5 lists supported multipathing software by operating system.
TABLE 5 6540 Multipathing Software
OS
Multipathing
Software Minimum Version Latest Version Host Type Setting Notes
Solaris 8/9 S STMS/MPxIO SFK 4.4.10 SFK 4.4.13
4.4.14 (Solaris 9)
Solaris with
MPxIO
Solaris 10 STMS/MPxIO Update 6
Update 5 with
patch 137137-09
(Sparc),
137138-09 (x64)
Kernel Jumbo
Patch (KJP)
Solaris with
MPxIO
Solaris 8, 9 RDAC 09.10.02.01 9.10.02.01 Solaris with
MPxIO
Solaris 8,9,10
with DMP
Symantec Veritas
Dynamic Multi-
Pathing (DMP)
5.0 5.0MP3 Solaris with
DMP
Windows
2000/2003 Non-
Clustered
RDAC/MPIO 09.01.32.30
(RDAC)
01.03.0302.0013
(MPIO)
Windows
2000/2003
Non Clustered
Windows MSCS
Cluster
RDAC/MPIO 09.01.32.30
(RDAC)
01.03.0302.0013
(MPIO)
Windows
2000/20003
Clustered
Support for
RDAC on
Windows stops
at 6.60 firmware.
You must use
MPIO for 7.10
and above
Windows
2000/2003
Non-Clustered
with DMP
DMP 5.0 5.1 Windows
2000/Server2003
non-clustered
(with Veritas
DMP)