User`s guide

5–Fibre Channel Noninteractive Commands

-n (Set Selected HBA Parameter)

SN0054667-00 B 5-27

Enable Fibre Channel

tape

EnableFCTape EF 1=Enable, 0=Disable

Enable hard loop ID EnableHardLoopID HL 1=Enable, 0=Disable

Enable LIP full login EnableLIPFullLogin FL 1=Enable, 0=Disable

Enable LIP reset EnableLipReset LP 1=Enable, 0=Disable

Enable target reset EnableTargetReset TR 1=Enable, 0=Disable

Execution throttle ExecutionThrottle ET 1–65535

Frame size FrameSize FR 512, 1024, 2048

Hard loop ID HardLoopID HD 0–125

Interrupt delay timer InterruptDelay-

Timer

ID 0–255

Link down timeout LinkDownTimeOut LT 0–240

Maximum LUNs per tar-

get

MaximumLUNsPerTar-

get

ML 0, 8, 16, 32, 64, 128,

256

Operation mode OperationMode OM

See table note

Port down retry count PortDownRetryCount PD 0–255

Reset Delay ResetDelay RD 0-255

Connection Options:

0 = Loop only

1 = Point-to-point only

2 = Loop preferred, otherwise point-to-point

3 = Point-to-point preferred, otherwise loop (QLA22xx adapters only)

Data Rate (QLA23xx/QLA24xx/QLE23xx/QLE24xx and QLE2562):

0 = 1 Gb

1 = 2Gbs

2 = Auto

3 = 4 Gbs

4 = 8 Gbs

EnableBIOS option not available on 4Gb adapter.

EnableExtendedLogging option not available on PPC64 or SPARC.

Table 5-9. Adapter Parameters (Continued)

Description Name Alias Value