User`s guide

5–Fibre Channel Noninteractive Commands
-gs (Show HBA Statistics)
5-14 SN0054667-00 B
-gs
(Show HBA Statistics)
To view the adapter statistics, issue the following command:
# qaucli -pr fc -gs (<hba instance> | <hba wwpn>) [(<param name> |
<param alias>) <param value>]
Where:
Table 5-5 lists the adapter statistics parameter names, aliases, and values.
Under Linux, this feature is disabled if you are using the IOCTL or sysfs (inbox)
driver.
-h
(Help)
To view the help file, issue the following command:
# qaucli -pr fc (-h)
To view help information for an individual command, issue the following command:
# qaucli -pr fc <Command Line Parameter> (-h)
For example, typing qaucli -pr fc -l -h shows:
hba instance = Adapter number (use -g command to find)
hba wwpn = World wide port name of the adapter
param name = Name of the parameter (see table 4-7)
param alias = Alias of the parameter (see table 4-7)
param value = New value of the parameter (see table 4-7)
Table 5-5. Adapter Statistics Parameters
Description Name Alias Value
Sets how often statistics are retrieved AutoPoll AP
0–256
a
a
When the AutoPoll value is 0, statistics are retrieved automatically until the user aborts the
operation.
When the AutoPoll value is in the range of 1–256, statistics are retrieved for the number of cycles
specified by this value.
Set the polling interval when retrieving statis-
tics (seconds)
PollRate SR 5–30
Saves the adapter’s statistics to a CVS log file LogToFile LF Log file
name