User`s guide

5–Fibre Channel Noninteractive Commands
-dm (Display Diagnostics Monitoring Info)
SN0054667-00 B 5-9
-dm
(Display Diagnostics Monitoring Info)
This option allows you to show general or detailed digital diagnostic monitoring
interface for optical transceivers.
To show transceiver monitoring general information, issue the following command:
# qaucli -pr fc -dm (<hba instance> | <hba wwpn> | <all>)general |
gen
To show transceiver monitoring detailed information, issue the following
command:
# qaucli -pr fc -dm (<hba instance> | <hba wwpn> | all)details |
det
Where:
-e
(Boot Device View | Select | Disable)
Use the -e command to:
 Show the current boot-device selection for all adapters.
 Show the current boot-device selection for a specific adapter.
 Set a target device as the boot device for an adapter.
 Selectable boot—The OS boots from the first target the BIOS finds.
 Delete the boot device from an adapter.
In these commands:
NOTE:
This option is supported only for QLA/QLE/QEM24xx (4GB) adapters.
hba instance = Adapter number (use -g command to find)
hba wwpn = World wide port name of the adapter
all = All adapters in the system
hba instance = Adapter number (use -g command to find)
hba wwpn = World wide port name of the adapter
target wwnn = World wide node name of the target
target wwpn = World wide port name of the target
target id = ID to which the target is bound
lun id = ID of the LUN