User`s guide

4–NIC Noninteractive Commands
-vtrestore (Restore VLAN & Teaming Configuration)
SN0054667-00 B 4-25
pDNSServers[ 0] : fec0:0:0:ffff::1
pDNSServers[ 1] : fec0:0:0:ffff::2
pDNSServers[ 2] : fec0:0:0:ffff::3
............................
VLAN ID : 555
............................
IPv4Address :
IPv4SubnetMask :
IPv4GatewayAddr :
DHCPServerCount : 0
IPv6GatewayAddr :
IPv6AddressCount : 0
DNSServerCount : 0
-vtrestore
(Restore VLAN & Teaming Configuration)
To reinstate previously saved VLAN and team settings from a file, issue the
-vtrestore command as follows:
> qaucli -pr nic -vtrestore [file_name]
The default file configuration file name for VLAN and teaming is
vtstate-user.cfg, which is saved in the QConvergeConsole CLI installation
directory. You may have saved your configuration with a different file name or
location.
For example:
>qaucli -pr nic -vtrestore c:/system_1.cfg
Using config file: E:\Program Files\QLogic Corporation
\QConvergeConsoleCLI\netscli.cfg
Loading CNA Data ...
Loading: 1. CNA ...
Loading: 1. CNA Port index : 1 ...
Loading: 1. CNA Port index : 2 ...
Loading: 2. CNA ...
Loading: 2. CNA Port index : 1 ...
Loading: 2. CNA Port index : 2 ...
Refreshing interfaces ... Please wait ...
Attempting to restore TEAMs and VLANs if configured prior to vtdriver updaate.
*** Teams:
*** Ports:
NOTE:
The -vtrestore command can restore a configuration file produced only
by the -vtsave command. Similarly, a configuration that is saved using the
QLogic Windows Teaming Property pages can be restored only with the
Windows Teaming Property Pages.