User`s guide

9–Converged Network Adapter Interactive Commands
Adapter Diagnostics
9-80 SN0054667-00 B
Adapter Diagnostics
4. Adapter Diagnostics1. Converged Network Adapter
From the main menu, select the Adapter Diagnostics option, and then select the
adapter model (CNA Model). The Converged Network Adapter (CNA)
Diagnostics menu presents options to test registers, test hardware, test Flash
memory, test interrupts, test links, test ports, test read-write buffers, test LEDs, run
the transceiver diagnostics monitoring interface (DMI), perform iSCSI adapter and
port diagnostics, and view the iSCSI port logs. For example:
CNA Adapter Information
1: CNA Model: QLE8242 SN: AFE1028C03899
Port 2 [Protocol(s): NIC FCoE iSCSI]
Port 1 [Protocol(s): NIC FCoE iSCSI]
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 1
Converged Network Adapter (CNA) Diagnostics
1: Register Test
2: Hardware Test
3: Flash Test
4: Interrupt Test
5: Link Test
6: Loopback Test
7: Read Write Buffer Test
8: Beacon/LED Test
9: Transceiver Diagnostics Monitoring Interface (DMI)
10: iSCSI Adapter Diagnostics
11: iSCSI Port Diagnostics
12: iSCSI Port Logs
Register Test
4. Adapter Diagnostics1. Converged Network Adapter1. CNA Model1. Register Test
From the Converged Network Adapter (CNA) Diagnostics menu, select the
Register Test option. From the port menu, select a port to test the register. For
example:
Converged Network Adapter (CNA) Diagnostics
CNA Model QLE8242 SN: AFE1028C03899
1. Port 2 [Protocol(s): NIC iSCSI FCoE]
MAC Address: 00:0E:1E:04:95:EC
WWPN: 21-00-00-0E-1E-04-95-EF
Port iSCSI Name: iqn.2000-04.com.qlogic:isp8214.0 SFP not installed
2. Port 1 [Protocol(s): NIC iSCSI FCoE]