User`s guide
9–Converged Network Adapter Interactive Commands
CNA iSCSI Configuration
9-52 SN0054667-00 B
State: Session Active
TGT_iSCSI_Name : iqn.1992-04.com.emc:cx.apm00103600607.b2
TGT_Target_ID : 3(*)
TGTO_Active : off(*)
TGTO_Access_Granted : off(*)
TGTO_Target_Entry : on(*)
TGTO_Initiator_Entry : off(*)
TGT_RetryCount : 0(*)
TGT_RetryDelay : 0(*)
TGT_DevType : 0(*)
TGT_ExeThrottle : 0
TGT_FirstBurstLen : 128
TGTIPO_Fragmentation : on(*)
.
.
.
Bind Target
2. CNA iSCSI Configuration4. Target Configuration<port selection>3. Bind Target
Select the Bind Target option to bind a target device.
Delete Target
2. CNA iSCSI Configuration4. Target Configuration<port selection>4. Delete Target
Select the Delete Target option to delete a target device. For example:
Target ID: 3 hba_no: 1 IP: 192.168.1.11 Port: 3260 TGT Instance #: 3
ISCSI Name: iqn.1992-04.com.emc:cx.apm00103600607.b2
Alias: 0607.b2
State: Session Active
Target ID: 4 hba_no: 1 IP: 192.168.1.10 Port: 3260 TGT Instance #: 4
ISCSI Name: iqn.1992-04.com.emc:cx.apm00103600607.a2
Alias:0607.a2
State: Session Active
Enter a Target ID or "ALL":
Configure Target Parameters
2. CNA iSCSI Configuration4. Target Configuration<port selection>5. Configure Target Parameters
Select the Configure Target Parameters option to configure target device
parameters.
Enter a Target ID:3
TGT_iSCSI_Name [] :iqn.1992-04.com.emc:cx.apm00103600607.b2
TGT_ExeThrottle [0] :
TGT_FirstBurstLen [256] :
TGTISCSIO_Force_Neg_Main_Keys [off] :
TGTISCSIO_Header_Digests [off] :
TGTISCSIO_Data_Digests [off] :
TGTISCSIO_Immediate_Data [on] :