User`s guide

9–Converged Network Adapter Interactive Commands
CNA FCoE Configuration
9-30 SN0054667-00 B
MAC Address: 00:0E:1E:04:95:E8
WWPN: 21-00-00-0E-1E-04-95-EB
Port iSCSI Name: iqn.2000-04.com.qlogic:isp8214.0 Online
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 2
Driver Settings Menu
-----------------------
Target: Display Options
-----------------------
1: Present persistently bound target(s) plus
any new target(s) with driver default (Current)
2: Present persistently bound target(s) Only
-----------------------
Target: Binding Options
-----------------------
3: Bind by World Wide Port Name (Current)
4: Bind by Port ID
5: Commit Changes
Present persistently bound target(s) plus any new target(s) with driver defaults
1. CNA FCoE Configuration5. Driver Parameters<port selection>1. Present persistently bound targets plus any
new targets with driver defaults
From the Drive Settings Menu, select this option to view persistently bound target
devices and new target devices with driver defaults. This setting affects the output
from the Display Configuration option (1. CNA FCoE Configuration2. Target
Persistent Binding1. Display Configuration). You must select the Commit
Changes option to save changes to this option.
Present persistently bound target(s) only
1. CNA FCoE Configuration5. Driver Parameters<port selection>2. Present persistently bound target(s) only
From the Drive Settings Menu, select this option to view persistently bound target
devices only. This setting affects the output from the Display Configuration
option (1. CNA FCoE Configuration2. Target Persistent Binding1. Display
Configuration). You must select the Commit Changes option to save changes to
this option.
Bind by World Wide Port Name
1. CNA FCoE Configuration5. Driver Parameters<port selection>3. Bind by World Wide Port Name
From the Drive Settings Menu, select the Bind by World Wide Port Name option
to configure the CLI to bind ports by WWPN. This setting affects the Bind
Target(s) option (1. CNA FCoE Configuration2. Target Persistent Binding2.
Bind Target(s)). You must select the Commit Changes option to save changes to
this option.