User`s guide
8–Fibre Channel Interactive Commands
Adapter Diagnostics
SN0054667-00 B 8-21
4: SUN
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 3
Updating HBA Parameters on HBA instance 0 - QLE2462. Please wait...
HBA Parameters update complete. Changes have been saved to HBA instance 0 and are
effective immediately.
Adapter Diagnostics
4. Adapter Diagnostics2. Fibre Channel Adapter
From the main menu, select the Adapter Diagnostics option and then select 2
(Fibre Channel Adapter). The FC Diagnostics menu presents options to perform
a loopback test, test the read write buffer, and view the transceiver diagnostics
information. For example:
Adapter Type Selection
1: Converged Network Adapter
2: Fibre Channel Adapter
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 2
FC Diagnostics
1: Loopback Test
2: Read Write Buffer Test
3: Transceiver Diagnostics Monitoring Interface (DMI)