User`s guide

SN0054667-00 B 8-1
8 Fibre Channel Interactive
Commands
This section describes the interactive mode command line options for Fibre
Channel Adapters. The interactive mode uses a series of menus from which you
select the option you want and enter the number for that option. For information
about non-interactive mode operation—in which you simply enter a one- or
two-letter code to perform operations on the adapter refer to Section 5, Fibre
Channel Noninteractive Commands.
This section uses a “breadcrumbs” line following most subsection headings that
shows you how to access that option; that is, it shows the hierarchical path from
the top level to the command under discussion. For example, to reach the Flash
Update option for Fibre Channel Adapters from the Main Menu, select option 3 to
choose Adapter Updates, 1 to select the Fibre Channel Adapter type, and then
1 to see the Flash Update option. The following shows the breadcrumbs
example:
3. Adapter Updates 1. Fibre Channel Adapter  1. Flash Update
The Main Menu is as follows:
Main Menu
1: Adapter Information
2: Adapter Configuration
3: Adapter Updates
4: Adapter Diagnostics
5: Adapter Statistics
6: Refresh
7: Help
8: Exit
Please Enter Selection: