User`s guide
7–NIC Interactive Commands
Undo Reset NIC Statistics (-sunreset)
7-14 SN0054667-00 B
Ethernet Statistics for the current port are reset
Undo Reset NIC Statistics (-sunreset)
5. Adapter Statistics1. Converged Network Adapter3. Undo Reset NIC Statistics
From the Converged Network Adapter (CNA) Statistics menu, select the Undo
Reset NIC Statistics option. From the port menu, select a port for which to
restore NIC port statistics counters to their values before the reset. For example:
Converged Network Adapter (CNA) Diagnostics
CNA Model QLE3242 SN: AFE1030C04339
1. Port 2 [Protocol(s): NIC]
MAC Address: 00:0E:1E:04:D3:34
2. Port 1 [Protocol(s): NIC]
MAC Address: 00:0E:1E:04:D3:30
(p or 0: Previous Menu; m or 98: Main Menu; ex or 99: Quit)
Please Enter Selection: 1
Statistics for the current port reset - UNDONE
Refresh
6. Refresh
From the main menu, select the Refresh option to refresh (reload) the adapters
and adapter port indexes. For example:
Scanning for QLogic adapters, please wait...
Using config file: C:\Program Files\...\iscli.cfg
Using config file: C:\Program Files\...\netscli.cfg
Loading: 1. CNA ... adapters, please wait...
Loading: 1. CNA Port index : 1 ...
Loading: 1. CNA Port index : 2 ...
Refreshing interfaces ... Please wait ......
Scanning for QLogic adapters, please wait...
Hit <Enter> to continue:
When you run QConvergeConsole CLI, the CLI collects all relevant information,
including the number of available ports and the state of each one. Between the
time you start QConvergeConsole CLI and the time you perform a specific action
or request additional information, changes may have occurred to the port state,
network state, or firmware parameters. To ensure that you are viewing the most
current information, you should perform a Refresh. (In some cases,
QConvergeConsole CLI automatically refreshes the information before or after
specific commands.)