User`s guide

6–iSCSI Noninteractive Commands
-stathba
SN0054667-00 B 6-27
-stathba
To display adapter-level statistics, issue the -stathba command as follows:
-stathba <hba_port_inst>
-stdsp
To view the send targets, issue the -stdsp command as follows:
-stdsp <hba_port_inst>
To use the -stdsp command, you must first issue the -stadd command at least
once to add a send target for discovery only. For more information, see “-stadd” on
page 6-26.
-strd
To execute a rediscovery of targets for the specified send target, issue the -strd
command as follows:
-strd <hba_port_inst> <target_instance>
To obtain the target instance, use the -dtdsp command.
To use the -strd command, you must first issue the -stadd command at least
once to add a send target for discovery only. For more information, see “-stadd” on
page 6-26.
-strem
To remove the specified send target, issue the -strem command as follows:
-strem <hba_port_inst> <target_instance>
To obtain the target instance, use the -dtdsp command.
To use the -strem command, you must first issue the -stadd command at least
once to add a send target for discovery only. For more information, see “-stadd” on
page 6-26.
-strema
To remove all send targets, issue the -strema command as follows:
-strema <hba_port_inst> <target_instance>
-t
(Display Target Information)
To view target information, issue the -t command as follows:
-t <hba_port_inst> [Target ID]