User`s guide

6–iSCSI Noninteractive Commands
-r (Update ROM Image)
SN0054667-00 B 6-23
-r
(Update ROM Image)
Be sure to select Save changes and reset HBA afterwards; otherwise, the
changes do not take effect.
Type the following command to update the specified adapter’s ROM:
-r <hba_port_inst> <file_name>
The <hba_port_inst> parameter is the adapter instance to update. The
<file_name> parameter indicates the file containing the ROM image to upload.
-rdf
To restore the specified adapter port’s firmware values to the factory default
values, issue the -rdf command:
-rdf <hba_port_inst>
Issuing this command resets the adapter.
-rdh
(Port Restore Factory Defaults)
Type the following command to restore the specified adapter port’s settings to
their factory defaults:
-rdh <hba_port_inst> [A] [F N I T C V]
CAUTION!
 Before attempting to update the ROM image, contact QLogic Customer
Support.
 Before updating the ROM image, ensure that no I/O processes are
running.
 An administrator must take necessary actions to ensure changes are
fully recognized by the operating system (reboot, flush cache, sync disk,
and so forth).
 A ROM update and reset are performed that requires that all applications
accessing impacted LUNs must be shut down.
 Any impacted systems must be unmounted.
NOTE:
The -rdh command is not supported in the QLA4010 adapter.