User`s guide

6–iSCSI Noninteractive Commands
-netconf6 (Configure IPv6 Settings)
SN0054667-00 B 6-19
Setting the IP address, subnet mask, or gateway turns off DHCP address
resolution for the IP configuration, if it is on.
-netconf6
(Configure IPv6 Settings)
To manually configure the IPv6 network settings, issue the -netconf6 command
as follows:
-netconf6 <hba_port_inst> [-IP <IPv6 Address>] [-IPNM <Subnet
Mask> <IPv6>] [-IPGW <Gateway Address>]
Where [option] includes the following:
Setting the IP address, subnet mask, or gateway turns off DHCP address
resolution for the IP configuration, if it is on. Some examples of usage follow.
IP <IP Address> = Set the IP address of the adapter
-IPNM <Subnet
Mask>
= Set the subnet mask of the adapter
-IPGW <Gateway
Address>
= Set the gateway
-DISN4 =
Disable IPv4 network setup
a
a
Mutually exclusive with the other IPv4 commands
-IPV4DHCP =
Set DHCP on
b
b
Mutually exclusive with -IP/-IPNM/IPGW
-IP = Set IP address
-IPNM = Set IP netmask
-IPGW = Set IP gateway
-DISN6 =
Disable IPv6 network setup
c
c
Mutually exclusive with -IPLLA/-IPLL
-IPLLA =
Set local link address automatically
d
d
Manual or automatic—mutually exclusive
-IPLL =
Set local link address manually
d
-IPR01A =
Set IPR0 and IPR1 automatically
e
e
Manual or automatic—mutually exclusive
-IPR0 =
Set routable address 0 manually
e
-IPR1 =
Set routable address 1 manually
e
-IPRRA =
Set router address automatically
f
f
Manual or automatic—mutually exclusive
-IPRR =
Set router address manually
f