User`s guide

6–iSCSI Noninteractive Commands
-dtlia (Login and Persist a Discovered Target)
SN0054667-00 B 6-9
-dtlia
(Login and Persist a Discovered Target)
To log in all discovered targets, issue the -dtlia command as follows:
-dtlia <hba_port_inst>
-dtrem
(Remove Discovered Target)
To remove a nonpersistent discovered target, issue the -dtrem command as
follows:
-dtrem <hba_port_inst> <target_instance>
To obtain the target instance, use the command “-dtdsp (Display Discovered
Targets)” on page 6-8.
-dtrema
(Remove Discovered Target)
To remove all nonpersistent discovered targets, issue the -dtrema command as
follows:
-dtrema <hba_port_inst>
-dumpcore
(Retrieve FW Coredump Record)
To dump the RAM memory to a file name of your choice, issue the -dumpcore
command as follows:
-dumpcore <hba_port_inst> [File name]
-dumpnvram
(Retrieve FW Flash & NVRAM Record)
To dump the NVRAM to a file name of your choice, issue the -dumpnvram
command as follows:
-dumpnvram <hba_port_inst> [File name]
-dv
To see the version of the iSCSI adapter driver(s) installed, issue the -dv
command as follows.
-dv