Product specifications

QLogic OFED+ Host Software Page 5 of 20
3 Bug Fixes
The following fixes have been made to the QLogic OFED+ Host software package between
versions 5.1.0.0.49 and 6.0.2.1.11:
Fixed in Release 5.1.0.0.49
o Test case mpi_fork no longer fails when using openmpi.
o When installing QLogic OFED+ Host software or QLogic InfiniBand Fabric Suite
software packages on a server configured with Ethernet bonding , the server
no longer hangs when IPoIB bonding is being installed.
o When using opensm, iba_report and fabric_info correctly reports the
number of Subnet Managers (SM)s in the fabric.
o When running with non-QLogic DDR or QDR devices, links now come up at
their appropriate speeds.
o When using OFED's standard ib_srp with a QLogic Fabric Virtual I/O
Controller (FVIC) Gateway module, data write operations no longer fail (which
resulted in a disconnect of the device).
o When running mvapich1 over Performance Scaled Messaging (PSM), all
commands such as saquery, iba_saquery, FastFabric tools and others are
available, along with non-MPI ULPs and commands.
Fixed in Release 5.1.0.2.1
o Added support for systems equipped with more than 16 cores. To run with
Open Message Passing Interface (MPI), download and build either Open MPI
1.34 or OpenMPI 1.4.
Fixed in Release 5.1.0.2.8
o Added support to allow installation of the 2.6.18-164 kernel on top of RHEL 5
U3.
o Added support for systems equipped with more than 16 cores. This support
includes Open MPI version 1.4, which replaces the older version in previous
releases.
Fixed in Release 5.1.0.3.14
None
Fixed in Release 6.0.0.0.54
o saquery -p query now issues a compliant GetTable (PathRecord) query. This
runs correctly when run against InfiniBand Trade Association (IBTA) compliant
Fabric Managers (FM)s.
o An issue in the Mellanox ConnectX firmware, causing it to freeze when doing
any of the following, has now been corrected:
1. When using any command or operation which uses mstvpd.
2. When using iba_hca_rev. This utility reports the revision of the firmware
on the Host Channel Adapter.
3. When using QLogic's firmware update tool, the user may have to reboot
the system, even if they did not change the firmware.