User`s guide

5–Command Line Interface
compare_luns add
ISR654606-00 A 5-23
compare_luns add
Schedules a standalone LUN compare job. You can name the job and associate it
with a job group. Scheduling options include: immediately, at a pre-defined later
time, or by serial scheduling. Serial scheduling requires that you assign a priority
to the job, which will be used to schedule it prior to (lower priority value) or after
(higher priority value) a specific job in the serial schedule queue of jobs.
Session miguser
Example The following example shows the compare_luns add command:
MPX200 (miguser) #> compare_luns add
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
MPX200 <2> (admin) (miguser) #> compare_luns add
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Index WWPN, PortId Symbolic Name Target Type
----- --------------------------------- -------------------- ------------
0 20:78:00:c0:ff:d5:9a:05, 8c-01-ef HP MSA2012fc-0 Src+Dest
1 50:00:1f:e1:50:0a:37:18, 82-01-00 HP HSV210-3 Src+Dest
Please select a Source Target from the list above ('q' to quit): 1
Index (VpGroup Name)
----- --------------
1 VPGROUP_1
2 VPGROUP_2
3 VPGROUP_3
4 VPGROUP_4
Please select a VPGroup for Source Lun ('q' to quit): 1
LUN Vendor LUN Size( GB) Attributes
--- ------ -------------- ----------
1 HP 10.00 SRC LUN