User`s guide

5–Command Line Interface
Commands
5-2 ISR654606-00 A
Miguser Session
The miguser is the migration administrator session that has privileges to run CLI
commands related to the migration operations. The default password for starting
the miguser session is migration. You can start and stop a miguser session using
the following commands:
miguser [start/begin]
miguser [end/cancel/stop]
For example:
MPX200 #> miguser begin
Password : *********
MPX200 (miguser) #>
MPX200 (miguser) #> miguser stop
MPX200 #>
Commands
Table 5-1 lists by type the DMS commands used in the CLI, and provides a
cross-reference to the details for each one.
Table 5-1. CLI Commands
Command Type Commands
set commands “set system” on page 5-5
“set features” on page 5-6
“set fc” on page 5-7
“set array” on page 5-8
“set VPGroups” on page 5-9
migration commands “migration_group add” on page 5-10
“migration_group remove” on page 5-11
“migration_group edit” on page 5-12
“migration add” on page 5-13
“migration rm” on page 5-16
“migration stop” on page 5-17
“migration start” on page 5-18
“migration pause” on page 5-19
“migration resume” on page 5-20
“migration acknowledge” on page 5-21